Classification : AWS : SFA5.5, E 8018C2L IS : 1395 E55 BC22gFe

Description
A medium heavy coated low hydrogen iron powder type electrodes, the weld metal deposits 3.5% Ni in the weld metal. It is specially designed for welding fine-grained steel, nickel steel and nickel alloy steel. It gives high ductility, toughness and resistance to the service temperature at minus 80^°C.. Thes low alloy high tensile electrodes gives smooth arc with medium penetration and negligible spatter. It is all position welding electrode with radiographic quality of weld deposit. Dry the electrode at 250°C for 1 hour before using.

Typical Applications : This low alloy high tensile electrodes are used for welding of nickel alloy equipment, fabrication of pressure vessels, piping system, valves & tanks. Used for welding low temperature service for locomotive main frames, refineries pipelines.

Classification : AWS : SFA5.5, E 8018G IS : 1395 E55 BG129Fe

Description
A basic coated low hydrogen iron powder type electrode. It is used for welding heavy section of fine grained, high strength steel, it is running very smooth and easy slag removable, yielding a weld deposit containing 1.50% Mn and 0.7% Ni. It gives radiographic quality and low temperature service down to minus 60°C

Typical Applications : Welding of high strength steel, heavy duty structural fabrication, fine grained, Q & T steel, pressure vessels, tanks, penstocks.

Classification : AWS : SFA5.5, E 9018G IS : 1395 E63 BG129Fe

Description
A heavy coated low hydrogen iron powder type electrode welding in all positions, used for welding steel having high tensile strength upto 70 Kg/mm² as well as low alloy structural steel, the weld metal is of radiographic quality having excellent welding characteristics like crack resistant with good toughness down to minus 50°C.

Typical Applications : Welding of grain refined steels. Q & T steel, HSLA steel, Structural fabrication, Penstocks, Tanks Pressure Vessels.

Classification : AWS : SFA5.5, E 9018B3 IS : 1395 E63 B-B3-26Fe

Description
A medium heavy coated low hydrogen iron powder type electrode, welding in all positions, used for welding of similar Cr-Mo steel. Its deposition efficiency is 106% approximately, the weld metal is of radiographic: quality and has creep resistance up to 600°C. The weld metal gives 2.25% Cr and 1.0% Mo having excellent welding characteristics. Dry the electrode at 300°C for obtaining best results.

Typical Applications : Suitable For welding 2.25% Cr, 1% Mo steels, low alloy steel boilers & pipeline operation, repair of high tensile steel castings, pipelines for oil refinery, power plant at service temperature upto 600°C. A 335-P11, Pipe A 387 Grade 11 Plate.

Classification : AWS : SFA5.5, E 9018B3L IS : 1395 E63 B-B3-26Fe

Description
A medium heavy coated controlled Carbon, low Hydrogen Iron powder type electrode, welding in all positions, used for welding of similar Cr-Mo steel, its deposition efficiency is 106% approximately, the weld metal is of radiographic quality and has creep resistance up to 600°C. The weld metal gives 2.25% Cr and 1.0% Mo having excellent welding characteristics. Dry the electrode at 300°C for obtaining best results.

Typical Applications : Suitable for welding 2.25% Cr, 1% Mo steels, low alloy steel boilers and pipeline operation, repair of high tensile steel castings, pipelines for oil refiners, power plant at service temperature up to 600°C. A335-P22 Pipe, A387 Gr. 2 Plate.

Classification : AWS : SFA5.5, E 10018M IS : 1395 E68 BM 229Fe

Description
It is medium heavy basic coated low hydrogen, low alloy iron powder type electrode, used for welding high tensile fully killed fine grained steel. The electrode has excellent welding characteristics and operates in all position. It gives radiographic quality of welds with easily removable slag and has good notch toughness down to Minus 50°C. It's deposition efficiency is approximately 112%, dry the electrode at 350°C for 2 hours to obtain good results.

Typical Applications : Welding of high tensile steel such as (USS-T-1. welding of penstocks, earth moving equipment's, heavy duty structural steel, fabrication for high tensile steels.

Classification : AWS : SFA5.5, E 11018M IS : 1395 E76B M 329Fe

Description
A basic coated low hydrogen Iron Powder type electrode used for welding high strength steel. The electrode is operating in all position and has excellent welding characteristics. The weld metal is of radiographic quality and posses high strength combined with excellent toughness at sub Zero temperature. It is used for welding high tensile fine grained steel.

Typical Applications : Welding of penstocks, earth moving equipment's, heavy duty structure made from high tensile steel, petrochemicals tanks & vessels.

Classification : AWS : SFA5.5, E 10016G IS : 1395 68 BG 126

Description
It is a hydrogen controlled medium heavy coated all position electrode. It has better creep resistance properties as well as corrosion resistance properties. It gives weld deposit which contain 1 % of Cr & 2.5% of Ni. The weld metal is of radiographic quality and possess excellent strength combined with good toughness. This electrode is used for welding of high tensile, low alloy steels, which contains Ni-Cr-Mo types. Therefore, it is use in chemical plants, especially for the welding of steam turbine, rotors etc. Redry the electrodes at 300°C about an hour for better results.

Typical Applications : It is used for welding earth moving equipment's, steam turbine, rotors of chemical plant, heavy machinery parts made of high tensile steel, automotive parts and Armour steel of Ni- Cr Mo based.

Classification : AWS : SFA5.5, E 8018 B6 IS : 1395 E55BB 620

Description
A low hydrogen iron powder type basic coated all position electrode. It gives weld deposit which contain 5% Cr, 0.5% Mo For the welding of similar Cr-Mo steel. The weld metal radiographic quality and has creep resistance up to 650°C. Dry the electrode at 300°C for obtaining best results.
Typical Applications : It is used for welding of 5% Cr, 0.5% Mo steel for high temp application in oil refineries, power plants, petrochemical plants, fertilizer industries.

Classification : AWS : SFA5.5, E 7018B₂L IS : 1395 E55B-B226Fe

Description
It is a low Carbon hydrogen controlled basic coated iron powder type electrode operates in all position. It gives smooth and stable arc with easily removable slag. It gives low carbon content 1.20% Cr, and 0.50% Mo type weld deposit with radiographic quality. The weld metal possess excellent mechanical properties and resistance to cracking caused by heavy stresses of hydrogen. Redry electrode at 250°C for 2 hours.

Typical Applications : Suitable for joining of crack resistant steel, low alloy steel. It is used for welding of pipelines in oil refineries, high temp synthetic chemical industries, electric power plant, steam pipes of boiler tubes, super heaters etc.

Classification : AWS : SFA5.5, E 8016-C₂ IS : 1395 E55 BC229Fe

Description
A medium heavy coated low hydrogen iron powder type electrode, the weld metal deposits 3.5% Mi in the weld metal. It is specially designed for welding fine grained steel, nickel steel and nickel alloy steel. It gives high ductility, toughness and resistance to the service temperature at minus 80"C. The electrode gives smooth arc with medium penetration and negligible spatter. It is all position electrode with radiographic quality of weld deposit. Dry the electrode at 250°C for 1 hour before using.

Typical Applications : It is used for welding of nickel alloy equipments, fabrication of pressure vessels, piping system, valves & tanks. Used for welding low temperature service for locomotive main frames, refineries pipelines.

Classification : AWS : A/SFA5.5, E 8018 W

Description
It is basic coated hydrogen controlled low alloy high tensile type electrode gives weld deposit of approx 0.6% Cr, 0.70% Ni and 0.50% Cu. which is highly resistance of atmospheric corrosion. It gives a smooth arc medium penetration with easily removable slag. Easy to operate in all positions. Redry electrode at 250°C for better results.

Typical Applications : Ideal for welding high tensile steel. Specially recommended for weathering steel like CORTEN A and B and their equivalents used in Chemical, Petrochemical, Railway, Industries to resist atmospheric corrosion. Recommended for joining steels containing similar composition.

Alloy Basis : Fe, Mn, Si.

Technical Data : UTS of joint : 45 - 50 Kgf/mm² Elongation : 20-28%

Typical Applications : It is specially used for welding of sheet metal works, it can be used for welding of mild steel of higher thickness, autobodies, storage tanks, wagons, ships, boilers, vehicle chassis etc.

Properties : Smooth and stable arc to ensure good bead finish, easy peeling slag, least spatter, weld bead of X-ray quality with appropriate penetration.

Alloy Basis : C, Mn, Si.

Technical Data : UTS of joint : 50 - 55 Kgf/mm² Elongation : 22-30%

Typical Applications : Ideally suited for joining & binding up for low and medium carbon steels. Equally good for depositing buffer layers before hard facing pressure vessels, steel castings, vehicle chassis, etc.

Properties : The weld bead has good appearance and slage peels off by itself. The weld metal is extremely ductile and resistant to cracking.

Alloy Basis : Fe,Cr,Ni,Mn.

Technical Data : UTS of joint : 70 - 85 Kgf/mm² Elongation : 22-24%
Ferrite content : 30% Approx
Hardness of pure deposit : 200-220 Brinell

Typical Applications : Heavy machinery parts, earth moving equipment's, automobile springs trumnions of cement mill and other allied components, parts subject to heat, corrosion and impact. Joining and surfacing of high carbon, low and high alloy steels, tool steels, springs steels, manganese steels, case hardening steels, high speed steels, cast steels and for difficult to weld steels and unidentified steels. For joining dissimilar steels.

Properties : Electrode has very soft arc and gives smooth and defect free austenoferritic weld metal. Almost no distortion and embrifflement of the base material. The deposit is resistant to friction, heat and corrosion, is work hardening and shockproof.

Alloy Basis : : Fe, Cr, Ni, Mn.

Technical Data : UTS of joint : 55 - 65 Kgf/mm² Elongation : 30-35%

Typical Applications : For joining and surfacing of all types of mild and alloyed steels, heat and scale resistant steels, manganese steels and for joining dissimilar steels. For a cushioning alloy under hard deposit. For re-fabricating and repairing of Valves, Rolls, Gears, hot dies, gas turbines, and parts subject to heat, corrosion and impact. Cladding side of S.S. clad steels, hydrogenation plants, and combustion chamber parts.
Properties : Smooth and sFully austenitic electrode with high strength and resistance to heat and corrosion, scale resistant up to 1200^° C. The deposit is tough, crack proof and water resistant.

Alloy Basis : Fe, Cr, Ni, Mn, Mo.

Technical Data : UTS of joint : 55 - 65 Kgf/mm² Elongation : 30-40%
Hardness of pure deposit : 200 Brineil (Approx.) Metal Recovery : 130%

Typical Applications : Welding stainless steels to carbon steels, low alloy steels, cast steels and austenitic manganese steels parts. Depositing stainless tough overlay and cast steel parts, austenitic manganese steel parts. Rebulding of impellers, shafts, and Valve faces, and seals and turbine blades to provide resistance to heat, abrasion erosion and corrosion.

Properties : This electrode gives smooth and stable arc, excellent weid finish and easily slag removable. The weld metal contains, Mo, which has excellent corrosion resistantability to oxidizing and non-oxidizings acids. The weld metal is strong, ductile and tough.

Alloy Basis : Ni.

Technical Data : UTS of joint : 30 - 34 Kgf/mm²Hardness : 100-130 Brinell

Typical Applications : A unique electrode for cold welding of Cast Iron without preheat and for joining Cast Iron to Mild Steel. Also suitable for surfacing Cast Iron parts subject to erosion, corrosion and high temperatures. Best suited for repairing intricate Cast Iron parts, Water pumps housing, Electric motor bodies and covers, Machine Frames, Cylinder blocks, Gears, also idea! for salvaging foundry Castings, Gears box and differential housings, lathe beds, sugar mill rollers, glass moulds and cast Iron dies.

Properties : Smooth stable arc, suitable for positional welding very little mixing up with base material, consequently the heat affected zone is easily machinable. NO under cut.

Alloy Basis : Fe, C, Si

Technical Data : UTS of joint : 60 Kgf/mm²

Typical Applications : Welding of and surfacing of Cast Iron, Joining of Cast iron to steel. Economical electrode particularly indicated for massive parts and large Castings, e.g. repair of foundry defects, damaged or cracked Castings. Can be successfully used on rusty, corroded and oil soaked parts. For obtaining better machinability, deposit final pass with RL-1115 or RL-1119.

Properties : Electrode with good bonding properties even on difficult to weld Cast iron. Close colour match between deposit and base material. Non machinable slope by grinding.

Alloy Basis : Ni, Fe.

Technical Data : UTS of joint : (all weld deposit) 35-45 Kgf/mm² Hardness: 150 -190 Brinell

Typical Applications : Hot and cold welding of Cast Iron parts of Grey Cast Iron, nodular graphite iron, malleable iron subject to heavy wear. Joining of Cast material with steel. The electrode is most suitable for the surfacing of the above materials. Casting machinable parts, bearing blocks, frames, Foundry castings etc.

Properties : Electrode with excellent welding characteristics. The deposit is machinable and crackproof. Good bonding on difficult to weld cast iron.

Alloy Basis : Fe,Cr.Ni.

Technical Data : UTS of joint : 53 - 65 Kgf/mm² Elongation : 35-40%

Typical Applications : For joining 18/8 stainless steel eg V2A, AISI 304/308. En 58A, Ugine NS 22, Avesta 832 NV, soderfors 553, Sandvik OR2, UHB stainless 3, staybrigh FSL, silver fox 304 etc. Which are used in chemical plants, dye works, breweries food industry and hospital equipments.

Properties : Corrosion and scale resistant deposit with extremely low carbon content (C<0.04%) easy arc striking. Flat shining bead, free from inter- mixing.

Alloy Basis : Fe, Cr, Ni, Mo

Technical Data : UTS of joint : 50 - 65 Kgf/mm² Elongation : 30-40%

Typical Applications : Welding of austenitic stainless Cr-Ni-Mo steels of the type 18 Cr/8Ni + Mo (V4A, AIS1316, Ugine NSM 22, Avesta 832SK, sodenfors 564, Sandvik OR 60, UHB stainless 24, etc.) for repair of cracks in heavy machinery parts and earth moving equipments, hot forging dies, dyeing and daily equipment etc., chemical vessels and plant breweries and food equipment.

Properties : The deposit containing extremely little carbon, is highly resistant against strong chemical influence and intercroystaline corrosion. Resistant against grain disintegration upto 300° C.

Alloy Basis : Fe,Cr,Ni.

Technical Data : UTS of joint : 55 - 65 Kgf/mm² Elongation : 30-35%

Typical Applications : Welding of austenitic, stainless, heat resistant Cr-Ni steels of the type 25 Cr / 20 Ni (NCT, Ugine MS 30, Avesta 254 E, Sandvik 15 RE 10). Also suitable for welding of steels with high carbon content often used in the building field. Furnace linings, furnace parts, burners, heat treatment pots and baskets.

Properties : Fully austenitic, heat resistant deposit heat resistant at working temperature up to 1200" C in oxidizing, sulphur free atmosphere.

Alloy Basis : Cu,Sn.P.

Technical Data : UTS of joint : 24 - 28 Kgf/mm², Elongation : 20%, Hardness of Pure Deposit 70-85.

Typical Applications : It is specially used for Welding and surfacing of Copper, Brass and Bronze, Joining Copper and Bronze to Cast Iron overlays and steel. Filling cavities in copper alloy castings. Overlays on pumps, shafts and bearing surfaces. Building up missing sections.
Properties : The Weld Metal is free from porosity and cracks. The bead is smooth and uniform, excellent colour match on bronze.

Alloy Basis : Ni, Ti, Cu. |AWS 5.11E 11E: Ni - Cu7]

Technical Data : UTS of joint : 48 - 55 Kgf/mm², Elongation : 30-35%

Typical Applications : Welding of Monel & Monel plated steels, joining of monel to steel: overlays of corrosion resistant Monel on steel. Repairing defects in Monel castings, used in fabrication, chemical food, daily and pharmaceutical industries. Before surfacing stainless steel with RL-5511 use RL-5521 as a buffer layer.
Properties : An electrode with stable arc, which is easy to manipulate and gives easily detachable slag. The deposit is dense, porosity free and very smooth. Resistant to sea water corrosion and heat.

Alloy Basis : Ni,Mn,Cr,Fe,Nb AWS5.11 E;Ni Cr Fe-3

Technical Data : UTS of joint : 55 - 60 Kgf/mm², Elongation :30 - 35%

Typical Applications : This is a versatile electrode for all position welding of Nickel, inconel, Monel. Nickei-Chromium-iron alloys. HK alloys stainless and heat resisting steels. Also for welding dissimilar metals such as carbon steels, stainless steels, nickel and nickel alloys to each other. For use on equipment and components made of pure Nickel, for fabrication of corrosion resistant tanks and containers, heat exchangers, furnace, components, boilers, fittings etc.
Properties : The electrode gives soft stable arc an low currents. Deposits are cold tough and have excellent resistant to sealing at high temperature and corrosion resistance at both normal and elevated temperatures. Also possess good thermal shock resistance.

Alloy Basis : Fe,Cr,Mn.C

Technical Data : Hardness of pure deposit : 29-35 RC

Typical Applications : Surfacing of parts subject to wear or impact rims, carbon - alloyed rails, dies, striking tools, rooling surfaces, sliding surfaces subject to heavy wear, matrixes, stampers, etc., also ideally suited for construction machinery parts like tractor sprockets, rollers, concrete mixer blades, pump shafts and conveyor screws. The right choice for providing buffer impact and abrasion occur together.
Properties : Basic all position electrode. The deposit is particularly resistant to Impact. Thick surfacing without intermediate layers possible.

Alloy Basis : Fe,Cr,Mo,C.

Technical Data : Hardness of pure deposit: 56 - 58 RC

Typical Applications : To surface parts subject to heavy abrasive wear and mild impact : digger teeth, drills, conveyor screws, cutting and forming tools, punches, hot work dies, shear blades, crusher hammers, crane wheels, conveyor buckets & conveyor parts, plough-shares, cultivators, pulverisers, skids mixers, oil expeiler worm, etc. Also manganese a steel parts subject to high abrasion.
Properties : Basic electrode with excellent welding characteristics. Economical for making hard overlays in all position. Gives regular beads. The deposit is hard, tough and free from porosities.

Alloy Basis : Fe,Cr,Mn, C, Ni

Technical Data : Hardness (As welded): 10-17RC After work hardening after 3 layers 45-55RC

Typical Applications : For joining manganese steel parts, hardfacing of parts subject to heavy impact and stress. For use on big crushing equipment for rocks, jaws, cones, gyratory crushing mantles, excavator teeth, manganese rails, etc.
Properties : The deposit is work-hardening type and highly resistant to cracking and deformation during working. Excellent abrasion resistance in work-hardened condition. Prolonged working life even when subjected simultaneously to impact and abrasion.

Alloy Basis : Fe.Cr,Mn,C.

Technical Data : UTS of joint : 80 - 85 Kgf/mm², Elongation : 30 - 33%, As welded : 17-20 RC After work hardening: 42 - 50 RC, Deposition rate (Metal recovery): 140%

Typical Applications : For all position welding of 14% Mn steels, armour steels, carbon steels also for surfacing of such steels. Ideal as underiayers before surfacing on 14% Mn steels. Hard or unidentified steels, very thick build-ups possible without cracking.
Properties : Work hardening type electrode with very high deposition rate. Extremely ductile and hence ideal for intricate and hardened manganese steel parts. has very fast work hardening tendency, high abrasion resistance and resistance to deformation and cracking.

Alloy Basis : Fe, Cr, Mo, C. W, V.

Technical Data : Hardness (As weided) : 59-61 RC, After heat treatment : 62-64 RC, After annealing : 25-30 RC

Typical Applications : It is specially used fFor the repair and manufacture of cold and hot cutting tools, tupening knives, broaches, punching tools, drills, milling tools, hot dies etc.
Properties : Basic electrode with excellent characteristics. The beads are fine - drawn and regular. The slage can be easily removed. The deposit is high quality tool steel, tough, hard, wear and oxidation resistant, free from cracks and porosities.

Alloy Basis : Ni,Cr,C,Mn.

Technical Data : Hardness: 58 - 62 RC

Typical Applications : Wear resistant surfacing of mild and low alloy steels; Building machines, digger teeth, bucket edges, conveyor screws, mixing wings, oil expeller worms, scrapper blades, cement die rigs, muller tyres, ploughshares etc.
Properties : Hard wear resistant deposit.

Alloy Basis : Fe, Cr. C.

Technical Data : Hardness:59-61 RC

Typical Applications : Primarily for "Spot Arc" building / roughening the chilled cast iron rolls in the sugar mills. Also for reclamation of sand slides, sevapers screw flights, mixing paddles etc.
Properties : Resistant to heavy !oads produced during crushing of canes. Smooth and stable arc, even in positional welding, provides faster due build-up due to high deposition rate. Excellent deposition with an aggressive "Spray type" arc permits its use even while the rolls are in operation; imparts better grip to canes being crushed, thus increasing the efficiency and productivity of the sugar mills.

Alloy Basis : C, Cv, Cb.

Technical Data : Hardness on second layer: 57-61 RC, Deposition rate (Metal recovery) : 180%

Typical Applications : For Hardfacing of parts subject to heavy abrasion and metal to metal wear with moderate impact upto 510°C. Suitable for refactory, press screws-brick press screws, cement press screws. Palm nut press screws, parts of crushers for friable material, conveyor screws, impellers, dredging bucket, edge runner bottom. Pug mill, wing knife, auger, boaring bits, blast furnace bells and hoppers.
Properties : Hard surfacing electrodes with very high metal recovery. Exceptional abrasion resistance at room temp. Easy arc control in horizontal position. No slag interference.

Alloy Basis : Fe,Cv,Cb,V.Mo,W, C.

Technical Data : Hardness on R.T : 57-63 RC, Hardness on 600L^o C : 40-43 RC, Deposition rate (Metal recovery) : 190-210%

Typical Applications : For surfacing a hopper and protection plates in quarries, ore crushing rolls, gyratory crushers, ore breaker teeth, sevaping brakes, sinter plant disintegrators, blastfurnace bills and hoppers.
Properties : Hard surfacing electrode with excellent abrasion resistance at high temp and exceptional metal recovery.

Typical Applications : For chamfering, gouging and making grooves in all industrial metals. For removing defective welds and rivets without using oxyacetylene and compressed air. Removing flashers and risers in foundry castings. For beveling cracks in machine frames without dismantling. A prerequisite for welding, cutting of metal parts on building sites.
Properties : Special electrode high blowing effect and producing hot exothermic penetrating arc. The molten metal is blown away quickly and provides good visibility. The cut is smooth and molten and blown away material can be removed easily. Does not damage the metal structure.

Typical Applications : Cutting and piercing of steel, Cast iron, Copper materials, Aluminium. Excellent for burning quirets, dismantling work at site and for cutting out unwanted metal in foundry castings. Oxy-acetylene or compressed air need not be used.
Properties : Special electrode with a coating which gives a stable arc during the cutting or piercing process. The kerps are clean and narrow. Suitable for all position. Produce negligible slag.