Classification : AWS : A.5. 1 8 ER 70S-6 IS 6419

Description
Royal Arc CO, Wire is o copper coated solid mig wire for CO₂ welding for general engineering and structural application. It gives spater free welding with CO2 gas and Ar + CO₂ gas mixtures. The weld deposit are free from porosities with very smooth and uniform weld bead.

Typical Applications : Suitable for Welding of structural steel, with high tensile strength up 540N/mm2, butt and fillet welding of automobile bodies, bridges, ships, containers, railway, rolling stock, bogies, storage tanks and general structural fabrications.

Classification : AWS : A.5.1 8 ER 705 - 3

Description
Royal - 7OS-3 Wire is a copper coated solid mig wire for CO₂ welding for general engineering and structural application. It gives spatter free welding with Co₂ gas and Ar + Co₂ gas mixtures. The weld deposit are free from porosities with very smooth and uniform weld bead.

Typical Applications : Suitable for Welding of structural steel, with high tensile strength up 540N/mm2, Butt and fillet welding of automobile bodies, bridges, ships, containers, railway, rolling, stock, bogies, storage tanks and general structural fabrications.

Classification : AWSA/SFA5.18 Class ER 70S2

Description
Triple deoxidized mild steel wire smooth flow, stable are and spatter under optimum welding conditions.

Typical Applications : Structural pressure vessels and boiler involving unalloyed and micro alloyed structural steels with specified tensile strength upto 520 N/Mz to meel sub zero impact requirements at minus 51^°C

Classification : IRS M-28-02 Class VI M1 & M2 Grade ER 308L AWS A5.9 ER 308L

Description
This wire rods with low carbon content confirms to AWS - SFA 5.9 ER 308L class. The weld metal is very good resistant to intergranular corrosion with free from porosity & moltan pool, and controlled ferrite.

Typical Applications : It is used for welding AISI, ASTM 308, 304, 304L type stainless steel plate, sheets, pipes, tubes etc. Fabricating equipments for dairy, chemical & fertilizer industries, oil refineries. Specially use for root run.

Description
This wire rods with low carbon content confirms to AWS - SFA 5.9 ER 309L class. The weld metal is free from porosity with good finish.

Typical Applications : Suitable for Welding of dissimilar steel combination such as AISI304 to carbon manganese steel and carbon steel used in fabrication barrier layer prior to surfacing & clad restoration specially used for root run.

Description
This is medium coated rutile type hard facing electrodes depositing on air hardening, weld metal is of approximately 600 BHN hardness. The weld metal resistant to severe abrasion and moderate impact, suitable for hardfacing applications like dredger bucket lips, plough, shares, excavator, conveyor buckets.

Typical Applications : Concrete mixer blades, excavator teeth plough shares, bucket lips, scraper blades, cement die, rings.

Classification : AWS/SFA A5.28 E80C-G
Description
A metal cored, low alloy steel electrode, Royalfil GS 80M is designed to weld with lower spatter, faster travel speeds, higher deposition rates and increased penetraiion with greater deposit weid consistency than solid wire. Royaifil GS 80M generates less fumes than flux cored electrodes. Faster travel speeds are achievable than wth solid etectrodes, thus increasing productvity and spatter emission is quite low.